Installation instructions 

 ▲ Packaging: radiator unpacked. Inlet and outlet should be put on plastic cap or plastic block. Prevent foreign matter into the chip. General packaging in plastic bags or corrugated. Such as the customer have special requirements according to user requirement. 
 ▲ Handling: radiator access to the site. When placed in the ground need to smooth. 100mm of moisture-proof material at the bottom of paving, loading, unloading, when moving down gently. Not damage the product packaging, the need for rain and sun protection measures. 
 ▲ installation: the radiator prior to installation. Can not remove the import and export plastic cap or blocking cap. To protect the integrity of the external thread, to ensure the quality of the installation. 
 Prior to the completion of the radiator installation or other decoration work of the same project is not completed, do not dismantle the packaging on the radiator. So that the radiator surface is damaged. 
 Install the product during installation (copper tube aluminum fin, copper and aluminum composite radiator more special attention to!), Installation operatives should be noted that [pipe wrench, wrenches, with special tools). Stuck in the bottom of the piece body wire head (not damage the thread). Stuck with the other tools required fittings. Clockwise precession. Maintain a uniform and balanced force, watertight appropriate. Prevent unilateral force, so as not to damage the product silk head junction. 
 ? Install the inlet and outlet pipe connections. With the top and bottom of the radiator inlet and outlet wire head into the axis parallel to the state, the length should be consistent to prevent the junction of steel pipe and the piece too far away. Deadlift, hard-on. 
 · Accessories release valve during installation. Should be placed to put the valve by hand to the inside precession. Then firmly tighten with a wrench lightly, but the force required to moderate in order to prevent the release valve or the copper block, the thread off the buckle, is strictly prohibited excessive force, causing the workpiece damage, such as accessories damage is no longer available, need to be replaced immediately . Replacement parts must be factory accessory products accessories included with the product. Not free to adopt other accessories, to prevent the cause for quality accessories. Causing undue loss. 
 ▲ maintenance precautions 
 · The system should be a closed system at constant pressure. The oxygen content of the recycled water and replenishment of the water heating system should be consistent with the national standards for boiler water. 
 · Radiator run should be scheduled for the standard working pressure. 
 · Run during non-heating season radiator is not dry and water, water conservation must be full. 
 Prohibits the use of industrial waste water, heat and power plant cooling water as a heat source, a direct connection with the radiator heating system. 
 ? Use should be to prevent other objects hit. Scratch the radiator. Such as local area from the skin. Off the head color of paint should be promptly carried out Buxiu in order to avoid large areas of damage. 
 · Radiator run heating during use, pay attention to take appropriate measures. Note that in the high temperature heating. Dust or repair damage the release valve, causing casualties.